CN EN
Hotline: +86-27-65271788
Home > Support > Maintenance > Maintenance
Resources Application Lab Maintenance Service System After-sales Service
Maintenance
Maintenance
Maintenance FAQ
A total of 0 product instructions are found
Laser Condensation Prevention Guide 2022/05/04 Everfoton's chassis of fiber laser adopts a closed design and is equipped with an air conditioner or dehumidifier to ensure that the components are in a relatively safe environment with stable temperature and humidity. If the chassis is not airtight, the high-temperature and high-humidity air outside can enter the chassis, and condense on its surface when it encounters the internal water-cooled components, causing possible damage. For immediate start of the laser, it is necessary to seal the
Laser Anti-freezing Guide 2022/05/04 The normal operating ambient temperature of the laser is required to be between 5 ℃ and 40 ℃. Beyond this range, the operation stability of the laser will be affected, and the laser will be damaged in worse cases. During the holiday season, if the ambient temperature of the equipment can be maintained above 5℃, the laser equipment needs no special protection and can be switched on or shut down. If the ambient temperature is below 5℃, you need to discharge the water from the laser and wat
Quick Guide to QBH Cleaning 2022/05/04 Everfoton's laser adopts all-fiber structure, with small fiber diameter and high power density inside the fiber. In the process of use, if the laser QBH output head is dirty or improperly cleaned, it tends to cause serious damage to the QBH output head and affect the stability of the laser. At the same time, the damage caused by such reasons, the long maintenance cycle, and the high repair price  tend to result in serious economic losses. To ensure the long-term stability of the
Previous page 1 Next page total 1 page
Turn to page
Contact Us

Hotline：
+86-27-65271788